6 Ft. Double Leg Shock Absorbing Lanyard – Y-Style, Rebar Hooks | Item #L112211

The 6 ft. Double Leg Shock Absorbing Lanyard (Item #L112211) is designed to provide 100% tie-off protection for workers operating at height. This Y-shaped (double leg) lanyard allows continuous connection while transitioning between anchorage points, enhancing safety and efficiency on the jobsite.

Constructed with high-visibility yellow webbing, the lanyard incorporates an integrated shock absorber to reduce fall arrest forces. One end of the shock absorber is fitted with a steel snap hook, while each leg is equipped with 2-1/4” steel rebar hooks, ensuring secure attachment to structural steel and anchorage points. Built to meet or exceed ANSI Z359.13-2013 standards, this lanyard is ideal for construction, steel erection, maintenance, and industrial fall protection applications.

FEATURES:      

• Length: 6 ft. double leg (Y-style) lanyard

• Configuration: Double leg for 100% tie-off

• Shock Absorber: Integrated energy-absorbing design

• Hardware: One steel snap hook at shock absorber end

• Two 2-1/4” steel rebar hooks on lanyard legs

• Webbing: High-visibility yellow

• Compliance: Meets or exceeds ANSI Z359.13-2013

• Application: Fall arrest systems

WEBBING: Material: Polyester Width: 0.98 in. ± 0.04 in. Breaking Strength: 30 kN (Min) STITCHING THREAD:    Material: High-tenacity polyamide | Color: BlackMETAL COMPONENT:   Material: Medium Carbon Steel (Hardness 35 to 42 HRC) Plating: Zinc Plated | Finish: Shot blasted Tensile Strength (PN-124): MIN 22.2 kN | Tensile Strength (PN-131): MIN 22.2 kN Gate Face Testing (PN-124): MIN 1.0 kN | Gate Face Testing (PN-131): MIN 1.0 kN Side Load Testing (PN-124): MIN 1.6 kN | Side Load Testing (PN-131): MIN 1.6 kNVITAL TEST COMPLIANCE:      Static Strength: 22.2 kN for 2 minutes Dynamic Strength: Maximum breaking force does not exceed 8 kN and lanyard elongation does not exceed 42 inches from a 6 foot free fall.